Dust Extractors
All the models of well-known brands such as Makita, TREND and FESTOOL we offer are suitable for wet and dry vacuuming. They offer protection against dust and of course are invaluable when cleaning up. All models can be attached to our routing, sawing or sanding tools to provide dust free working. Our industrial models are just at home on a construction site as in the workshop.
Read more
1 piece
Item no.: I-151-BFLUXSFIn stock, delivery in 1-2 business days
Highly efficient particle filter with a 99,2 % filtration
Item no.: I-151-PFLUX1-SFDelivery time 7 business days
For Laguna AFlux 12
Item no.: I-151-AFLUXIFIn stock, delivery in 1-2 business days
5 pieces
Item no.: I-STPO-WB6510Delivery time 7 business days
For LAGUNA AFlux 12
Item no.: I-151-AFLUXOFIn stock, delivery in 1-2 business days
HEPA filter
Item no.: I-151-CFLUX1-SFDelivery time 7 business days
Cone adapter- 29/30/35 mm
Item no.: D-DWV9110-XJIn stock, delivery in 1-2 business days
5 pieces | Compatible with CFlux 1 and PFlux 1 | 800 x 1100 mm
Item no.: I-STPO-WB8011In stock, delivery in 1-2 business days
5 pieces | Compatible with CFlux 3 and PFlux 3 | 900 x 1200 mm
Item no.: I-STPO-WB9012In stock, delivery in 1-2 business days
For antistatic suction hose D 27
Item no.: F-452892In stock, delivery in 1-2 business days
For antistatic suction hose D 50 | Connect a D 50 hose to D 36 accessory
Item no.: F-452897In stock, delivery in 1-2 business days
Suitable for 100 mm suction hose | Tool-free | Can be operated with one hand | 2 pieces
Item no.: I-146-0015In stock, delivery in 1-2 business days
For D 27/D 36 | 3x extension tube | Length: 950 mm
Item no.: F-452902In stock, delivery in 1-2 business days
For D 27/D 36 | 3x extension tube | Length: 950 mm
Item no.: F-203137Delivery time 5 business days
For Ø 100 mm | Flexible | Easy mounting | Fits Ø 102 - 100 mm
Item no.: I-146-0024In stock, delivery in 1-2 business days
For hoses with Ø 100 mm | Made of plastic
Item no.: I-121-JW1047In stock, delivery in 1-2 business days
For nozzles with Ø 100 mm | Reinforced with copper-plated steel spiral | 2,5 m length
Item no.: I-FHP-100025In stock, delivery in 1-2 business days
For nozzles with Ø 100 mm | Reinforced with copper-plated steel spiral | 5 m length
Item no.: I-FHP-100050In stock, delivery in 1-2 business days
For nozzles with Ø 100 mm | Reinforced with copper-plated steel spiral | 10 m length
Item no.: I-FHP-100100In stock, delivery in 1-2 business days
for suction hose D 36/32 | for all power tools D36 flange and cleaning accessories
Item no.: F-500671In stock, delivery in 1-2 business days
Stainless steel | 9 mm wide
Item no.: I-FHS-102122In stock, delivery in 1-2 business days
Quick release clamp | For hoses with Ø 100 mm
Item no.: I-146-0017In stock, delivery in 1-2 business days
Diameter: 50 mm | Length: 2,5 m
Item no.: F-452888In stock, delivery in 1-2 business days
for D 50/D 36/D 27
Item no.: F-452898In stock, delivery in 1-2 business days
The special demands on the industrial vacuum cleaner
Especially in a carpentry workshop there can be an enormous amount of fine dust produced. This not only make the place untidy but can be very unhealthy. Some types of dust can be really dangerous for the lungs. Therefore, a workshop vacuum cleaner must be installed to keep the fine dust in the workshop to a minimum. Large wood chips and shavings should also not be a problem. The ability to vacuum up liquids can also prove very useful in some situations.
the Dust classifications
When choosing a dust extractor the classification of the filter system is important. There are 3 classes
- L (Low) Class ≤ 1.0% Dusts with maximum allowable concentrations (MAC)>1mg/m³
- M (Medium) Class <0.1% Dusts with maximum allowable concentrations (MAC)≥0.1mg/m³
- H (High) Class <0.005% Dusts with maximum allowable concentrations (MAC)<0.1mg/m³
L class extractors can be compared to domestic vacuum cleaners and should only be used with softwoods. The usual workshop dust extractor is a class M, that means that 99.9% of dust is trapped in the filter. That is needed when working on hardwoods, MDF, brick etc. Class H are needed for specialist work for example where carciogenic materials are involved.
Which Dust Extractor is right for me?
You should consider the amount of work you will be doing so you can judge the volume you need, together with which materials are to be worked on. If you are using the dust extractor in a professional workshop you should make sure you know the legal requirements in your country.