Sauter insert plate accessories

for levelling of mounting plates and OFLs | For alignment in router table- especially with softer table top material

for insert plates and sauter router lifts | made of MDF - suitable for panel size 306 x 229 mm

for mounting and insertion plates | made of MDF - for insert plates with dimensions 306 x 229 mm

For fixing and insert boards in KREG format | of MDF | for insert boards with dimensions 298 x 235 mm

for levelling of mounting plates and OFLs in Kreg format | especially with softer table top material

for all sauter ELP2.0, OFL2.0 and OFL3.0 | Steel reducing plates with Ø  0 |10 | 16 | 22 | 42 | 54 | 86 | 98 mm

for all sauter ELP2.0, OFL2.0 and OFL3.0 | Steel reducing plates with Ø 10 |16 | 54 | 98 mm

Perfect accessory for all sauter OFL and ELP | Safely keeps fingers protected

for stationary routing with guide bushes | use with US copy sleeves | for all sauter insert plates and lifts with steel reduction plates

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel to close the opening

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø 10 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø 16 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 22 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 32 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 42 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 54 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 68 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 86 mm

for sauter premium insert plate ELP2.0, OFL2.0 & OFL3.0 | made of galvanised, 2 mm thick steel with cutter opening Ø- 98 mm

for levelling the reduction plates for ELP & OFL | Disc thickness: 0.1 mm | Ø 20 mm |- magnetic stainless steel

for the installation of mounting plates and OFLs | 20-piece set made of high-quality aluminium

Starter pin for insert plates | suitable for all sauter ELP, OFL & FO-RTS plates with 1/4" thread

Spare plastic rings for insert plates and router lifts | suitable for: sauter ELP1.0 & OFL1.0, insert plates RTS1 & RTS2

For stationary routing with guide bushes | 7 guide bushes | for all sauter insert plates and lifts with steel reduction plates