Router Guide Bushes & Sub-Bases
Guide bushes for routers, also known as copy sleeves or thrust rings, are required to guide the router along a template or stop if you do not use router cutters which have their own ball bearing. We offer one of the widest ranges of copy rings for routers, suitable for direct mounting on many routers, or by means of adapter plates of the UNIBASE or FRB type on almost all routers on the market. Basically there are two quality levels of copy rings in our shop:
- Copy tubes made of steel: are very precise and durable
- Copy rings made of plastic: are recommend the hobby craftsman for occasional use
OD: 11.1 mm l Sleeve 4 mm
Item no.: I-FGB111-03In stock, delivery in 1-2 business days
Template Guide Ø: 17 mm | With Quick-fastening Bayonet lock
Item no.: B-2-609-200-139In stock, delivery in 1-2 business days
Template Guide Ø: 13 mm | With Quick-fastening Bayonet lock
Item no.: B-2-609-200-138In stock, delivery in 1-2 business days
Template Guide Ø: 16 mm | With Quick-fastening Bayonet lock
Item no.: B-2-608-000-471In stock, delivery in 1-2 business days
Screws f. Guide Bush2Ba x 6.35 mm (pack of 10) | 2BA X 6,35 mm
Item no.: T-GB-01In stock, delivery in 1-2 business days
Template Guide Ø: 40 mm | With Quick-fastening Bayonet lock
Item no.: B-2-609-200-312In stock, delivery in 1-2 business days
Template Guide Ø: 27 mm | With Quick-fastening Bayonet locks
Item no.: B-2-609-200-141In stock, delivery in 1-2 business days
Guide Bush ring 30mm to 53,9mm | 30mm - 53.9mm
Item no.: T-GB-COLL-3054In stock, delivery in 1-2 business days
Template Guide Ø: 30 mm | With Quick-fastening Bayonet lock
Item no.: B-2-609-200-142In stock, delivery in 1-2 business days
Template Guide Ø: 24 mm | With Quick-fastening Bayonet lock
Item no.: B-2-609-200-140In stock, delivery in 1-2 business days
Guide Bush -Rings | suitable for GB793, gives 14.3 mm OD, use with 3.2 mm cutter diameter
Item no.: T-GB-COLL-7914In stock, delivery in 1-2 business days
Copying ring KR-D 10,8/OF 1010 | D: 10,8 mm | d: 7,8 mm | For OF 900, OF 1000, OF 1010, OF 1010 R and KF
Item no.: F-486029In stock, delivery in 1-2 business days
Guide Bush -Set in 8 different sizes | Outside Ø 10, 12, 17, 20, 24, 27, 30 and 40 mm
Item no.: FO-CMT235In stock, delivery in 1-2 business days
For holding guide bushes | 9 hole patterns for trim routers | Glass fibre reinforced | Precision centring
Item no.: T-UNIBASE-TRIMIn stock, delivery in 1-2 business days
For holding guide bushes | 18 hole patterns | Glass fibre reinforced | Precision centring | Ø 180 mm
Item no.: T-UNIBASE-180In stock, delivery in 1-2 business days
for 1/4" (6,35mm) and 8mm shanks | max. Ø Centering head 40 mm
Item no.: SA-C-PIN-1In stock, delivery in 1-2 business days
For holding guide bushes | 13 hole patterns for most small routers | Glass fibre reinforced | Precision centring
Item no.: T-UNIBASE-150In stock, delivery in 1-2 business days
Adapter plate for router copy rings | for all routersn, undrilled, transparent, D=170 mm, thickness 8 mm
Item no.: I-FRB170In stock, delivery in 1-2 business days
OD: 9.5 mm l ID: 7.9 mm l Sleeve 6 mm
Item no.: T-GB95In stock, delivery in 1-2 business days
KR-D 13,8/OF 900/1000/1010 Copy ring | D: 13,8 mm | d: 10,8 mm | For OF 900, OF 1000, OF 1010 and OF 1010 R
Item no.: F-484176Delivery time 5 business days
OD: 10.8 mm l ID: 8.8 mm l Sleeve 4.5 mm
Item no.: T-GB108In stock, delivery in 1-2 business days
KR-D17/OF 1010 Copy ring | D: 17 mm | d: 14 mm | For OF 900, OF 1000, OF 1010, OF 1010 R and KF
Item no.: F-486030In stock, delivery in 1-2 business days
Transparent base plate with 8 copy rings | 178mm universal base plate, brass guide bushes
Item no.: M-1261In stock, delivery in 1-2 business days
OD: 11.1 mm l ID: 9 mm l Sleeve 6 mm
Item no.: T-GB111In stock, delivery in 1-2 business days
Steel or plastic copy rings to choose from
In combination with our routing templates for countering kitchen worktops, we recommend the use of steel thrust washers, as in these applications, on Because of the strong forces, plastic copy rings melt or break relatively quickly.
We recommend our plastic copy sleeves exclusively for use with the sample templates, e.g. Design Inlay Kit, SIGNCRAFTER letter routing templates or for simple work that requires cause little pressure on the copy rings. For all professional applications we recommend the use of steel sleeves.
Additional rings can also be used to reduce the thickness of the nose and thus the distance to the workpiece, especially during inlay work.